No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snapsync db

show snapsync db


The show snapsync db command is used to query database information about snapshot synchronization.


show snapsync db snapsync_id=?






Snapshot synchronization ID.

To obtain the value, run the "show fs_migration db" command.


Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers. This command is only used to query database configuration information about snapshot synchronization when snapshot synchronization cannot be queried on the CLI due to snapshot synchronization database errors. Do not use the command in other scenarios.

OceanStor 5500 V5 Elite/5300F V5/5500F V5/5500 V5/5800F V5/5800 V5/6800F V5/6800 V5/5600F V5/5600 V5/5300 V5 storage systems support this command.


Query database information about snapshot synchronization "1".

developer:/>show snapsync db snapsync_id=1 
  SnapSync ID : 1 
  Service ID     : 1 
  Local FS ID : 1 
  Local Dcl ID : 101  
  Local DB Index : 1 
  Is Primary     : True

System Response

The following table describes the parameter meanings.



SnapSync ID

Snapshot synchronization ID.

Service ID

Service ID of snapshot synchronization.

Local FS ID

Local file system ID of snapshot synchronization.

Local Dcl ID

DCL ID of snapshot synchronization.

Local DB Index

Local database index of snapshot synchronization.

Is Primary

Whether it is the primary end of snapshot synchronization.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638569

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next