No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance ndmp

show performance ndmp

Function

The show performance ndmp command is used to query NDMP delay statistics.

Format

show performance ndmp [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

If you run this command without specifying any parameters, you run this command on the primary node.

Example

View the detailed information of the NDMP delay time.

admin:/>show performance ndmp controller=0A 

Command Name Max Delay(usec) Min Delay(usec) Ave Delay(usec) Ave Buf Size(Byte) Call Times  
------------ ------------- --------------  --------------  --------------     ----------- 
open         90              30              60              600                5000 
close        70              50              60            500                6000 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Command Name

Indicates the system interface.

Max Delay(usec)

Indicates the max delay time.

Min Delay(usec)

Indicates the min delay time.

Ave Delay(usec)

Indicates the average delay time.

Ave Buf Size(Byte)

Indicates the average BUF sizes.

Call Times

Indicates the CALL times.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631936

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next