No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show hypervault_restore general

show hypervault_restore general

Function

The show hypervault_restore general command is used to view restore job information about a HyperVault.

Format

show hypervault_restore general hypervault_id=?

Parameters

Parameter

Description

Value

hypervault_id=?

ID of the HyperVault object whose restore job information you want to view.

To obtain the value, run the "show hypervault general" command.

Views

Developer view

Usage Guidelines

None

Example

View restore job information about HyperVault "12345".

developer:/>show hypervault_restore general hypervault_id=12345 
Vault ID  :  12345 
LocalDs ID: 1 
RemoteDs ID: 1 
Snap ID:     0 
Snap Tx:  1 
Job ID:  1211112 
Flow Code: 558321234 
Db Step:  11 
Action Step: 1 
Master Ret:  0 
Slave Ret: 0 
Need Stop: 0 
MasterClearFsStatus:1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Vault ID

ID of the HyperVault object.

LocalDs ID

ID of the local device resource.

RemoteDs ID

ID of the remote device resource.

Snap ID

ID of the snapshot used for restoration.

Snap Tx

TX of the snapshot restored.

Job ID

ID of the restore job.

Flow Code

OPCODE of the restore job process.

Db Step

DB step of the restore job.

Action Step

Action step of the restore job.

Master Ret

Execution result of the restore job on the primary device.

Slave Ret

Execution result of the restore job on the secondary device.

Need Stop

Flag of restore job suspension.

MasterClearFsStatus

FS status of restore job clearing on the primary device.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 577733

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next