No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
adm show conf

adm show conf

Function

The adm show conf command is used to show the current configuration.

Format

adm show conf

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

To show the current configuration, run the following command.


admin:/diagnose>adm show conf 
maxArrayNumber=32 
maxLinkNumber=256 
maxLunNumber=256 
maxPathPerLun=8 
maxMpArrayNumber=32 
maxMpLinkNumber=128 
maxMpPathPerLun=4 
maxDisguiseLunNum=512 
backgroundTaskBypassFlag=0 valid=TRUE 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

maxArrayNumber

Maximum number of disk arrays.

maxLinkNumber

Maximum number of physical links.

maxLunNumber

Maximum number of LUNs.

maxPathPerLun

Maximum number of paths supported by a LUN.

maxMpArrayNumber

Maximum number of disk arrays supported by a controller.

maxMpLinkNumber

Maximum number of physical links supported by a controller.

maxMpPathPerLun

Maximum number of paths supported by a LUN with a single controller.

maxDisguiseLunNum

Maximum number of masqueraded LUNs.

backgroundTaskBypassFlag

Identifier of background task isolation.

valid

Whether the background task isolation is supported.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638804

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next