No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ioctrl showio

ioctrl showio

Function

The ioctrl showio command is used to query the count of I/Os in the IOCTRL module.

Format

ioctrl showio

Parameters

None

Views

Diagnostic view

Usage Guidelines

This command is used to query the count of I/Os in the IOCTRL module.

Example

Query the count of I/Os in the IOCTRL module.

admin:/diagnose>ioctrl showio 

  Name                             Start        Back Good Back Retry Back Bad     Not Back 
  ------------------------------ ------------ ------------ ------------ ------------ ------------ 
  IOCTRL_COUNTER_BLOCK_RSS_IO                 0            0            0            0            0 
  IOCTRL_COUNTER_UNBLOCK_RSS_IO               0            0            0            0            0 
  IOCTRL_COUNTER_HANG_RSS_IO                602          602            0            0            0 
  IOCTRL_COUNTER_UNHANG_RSS_IO              511          511            0            0            0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Start

Count of I/Os to the module.

Back Good

Count of I/Os for which a success message is returned.

Back Retry

Count of I/Os for which a retry message is returned.

Back Bad

Count of I/Os for which a failure message is returned.

Not Back

Count of I/Os for which no message is returned.

IOCTRL_COUNTER_BLOCK_RSS_IO

Count of blocked value-added I/Os.

IOCTRL_COUNTER_UNBLOCK_RSS_IO

Count of unblocked value-added I/Os.

IOCTRL_COUNTER_HANG_RSS_IO

Count of hanged value-added I/Os.

IOCTRL_COUNTER_UNHANG_RSS_IO

Count of unhanged value-added I/Os.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631292

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next