No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal control_info

show pal control_info


The show pal memory command is used to query the global information of the PAL control and management module.


show pal control_info




Developer view

Usage Guidelines



Query information about the PAL control and management module.

developer:/>show pal control_info 

  Notify Information: 
  File System Notify Source PID : 0          
  Last File System Notify ID : 0          
  Space Notify Source PID       : 0          
  Last Space Notify ID          : 0          

Cluster Information: 
  Fault Node Bitmap     : 0          
  Normal Node Bitmap : 3          
  Offline Node Bitmap : 0          
  Standby Bode Bitmap : 0          
  Master Nid            : 0          
  Product Serial Number : 12345678987654321c25 
  Config Node Number : 2          

  Lock Partition Id     : 765

System Response

The following table describes the parameter meanings.



File System Notify Source PID

PID of the file system event sender.

Last File System Notify ID

ID of the last file system event.

Space Notify Source PID

ID of the space event sender.

Last Space Notify ID

ID of the last space event.

Fault Node Bitmap

Bitmap of faulty or isolated nodes.

Normal Node Bitmap

Bitmap of online nodes.

Offline Node Bitmap

Bitmap of offline nodes.

Standby Bode Bitmap

Bitmap of nodes newly added into the cluster (services are not recovered).

Master Nid

ID of the primary node in the cluster.

Product Serial Number

Product SN.

Config Node Number

Number of nodes configured.

Lock Partition ID

ID of the obtained memory partition.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 640633

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next