No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete lun_migration_dcl

delete lun_migration_dcl


The delete lun_migration_dcl command is used to forcibly delete the migration DCL of a specific LUN.


delete lun_migration_dcl lun_id=? dcl_id=?






ID of a LUN.

To obtain the value, run "show lun general".


ID of a DCL.

To obtain the value, run "dcl showdclid".


Developer view

Usage Guidelines

  • Use this command with R&D engineers' guidance.
  • This command can only be used when the migration DCL of a LUN cannot be deleted on the CLI due to database errors. Do not use this command in other scenarios.
  • This command must be used with the "delete lun_migration_db" command. Restart the system after running the commands.


Delete migration DCL "3" of LUN "0".

developer:/>delete lun_migration_dcl lun_id=0 dcl_id=3 
DANGER: You are deleting the LUN migration DCL of a specified LUN, this operation will forcibly delete the DCL of LUN migration. 
Suggestion: Before you perform this operation, please contact technical support engineers. 
Have you read danger alert message carefully?(y/n)y  

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 635541

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next