No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change nfs nfsv41_session_forechannel

change nfs nfsv41_session_forechannel


The change nfs nfsv41_session_forechannel command is used to change the NFSv4.1 session fore channel attribute.


change nfs nfsv41_session_forechannel { max_cache_size=? | max_reqs_count=? | max_ops_count=? } *






Maximum fore channel response cache bytes.

The value ranges from 80 to 1,974 bytes.


Maximum number of slots in a session.

The value ranges from 1 to 256.


Maximum number of compound operations.

The value ranges from 1 to 100.


Developer view

Usage Guidelines



Change the NFSv4.1 session attribute.

developer:/>change nfs nfsv41_session_forechannel max_cache_size=1024 
WARNING: You are about to modify the NFSv4.1 session fore channel attribute. This operation may interrupt users' access to the NFS share service or cause access exceptions. 
Suggestion: Perform this operation based on the system access requirements. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 639234

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next