No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showdirtydataflag

sys showdirtydataflag

Function

The sys showdirtydataflag command is used to check the dirty data flags on the node where the engine resides.

Format

sys showdirtydataflag

Parameters

None

Views

Diagnostic view

Usage Guidelines

Run this command in debug mode in developer view.

Example

Check the dirty data flags on the node where the engine resides.

admin:/diagnose>sys showdirtydataflag 
Dirty data flag value: 
magic:4951 
frame sn:2377900751982385332 
serial num:24 
node bitmap:3 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Dirty data flag value

Dirty data flags.

magic

Magic number.

frame sn

Controller enclosure SN.

serial num

Serial number.

node bitmap

Node bitmap.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 586696

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next