No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show csc general

show csc general


The show csc general command is used to query cross-site cluster information.


show csc general [ zonename=? ]






Name of a cross-site cluster.

The value starts with "0x" and ends with "01". The other characters range from 0 to 9 or a to z. To obtain the value, run the "show csc general" command without parameters.


Developer view

Usage Guidelines

  • Run the "show csc general" command to query basic information about all cross-site clusters.
  • Run the "show csc general zonename=?" command to query details about a specific cross-site cluster.


  • Query basic information about all cross-site clusters.
    developer:/>show csc general 
    Zonename Status Local ID Node Bitmap 
    ---------- ------- -------- --------------------------------------------------- 
    0x04030201 Normal 1 n:0x00000003,s:0x00000000,f:0x00000000,o:0x00000000 
    0x06030201 Standby 17 n:0x00030000,s:0x00000000,f:0x00000000,o:0x00000000
  • Query details about the cross-site cluster whose zone name is "0x04030201".
    developer:/>show csc general zonename=0x04030201 
    Zonename : 0x04030201 
    Status : Normal 
    Local ID : 1 
    Node Bitmap : n:0x00000003,s:0x00000000,f:0x00000000,o:0x00000000 
    Join Bitmap : init:0x00000003,joining:0x00000000,joined:0x00000000,notify:0x00000000 
    Master Esn : 210235G7N310E2000012 
    Proxy Esn : 210235G7N310E2000013 
    Fsm Status : 0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0,8:0 
    Connetion Epoch : local:0,remote:0 
    Master Node ID : local:0,remote:0 
    Node Event Mode : 2 
    Node Event Num : 0

System Response

The following table describes the parameter meanings.




Zone name.


Zone status.

Local ID

ID of a node in a cross-site cluster.

Node Bitmap

Node view.

Join Bitmap

Recovery status bitmap of a clustered node.

Master Esn

Local ESN.

Proxy Esn

Remote ESN.

Fsm Status

State machine status.

Connetion Epoch

Count of communication links between sites.

Master Node ID

ID of the primary node.

Node Event Mode

Status of a node event.

Node Event Num

Count of node events.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632935

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next