No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvist showperf

drvist showperf

Function

The drvist showperf command is used to show the performance statistics information.

Format

drvist showperf op [srcIP] [dstIP]

Parameters

Parameter

Description

Value

op

Operation type.

The values are as follows:

  • "show": The performance statistics information is showed.
  • "help": The use help is showed.

srcIP

Initiator IP address.

The value is in the IPv4 or IPv6 format.

dstIP

Target IP address.

The value is in the IPv4 or IPv6 format.

Views

Diagnostic view

Usage Guidelines

None

Example

  • Use the help.
    admin:/diagnose>drvist showperf help 
    Usage: drvist showperf show [src IP] [dst IP] 
    For example: drvist showperf show srcip dstip 
    admin:/diagnose>
  • Show the performance statistics information.
    admin:/diagnose>drvist showperf show 10.1.1.1 10.1.1.2 
    show io performance in 1 seconds,sess:ffffc9004fb8f3c8,total io = 99602 
    number of read command = 49802 
    stages_start           --->stage_end              ave(us) max(us) min(us) total(s)  pass      skip         
    -------------------------------------------------------------------------------------------------------- 
    cmd start              --->cmd to tgt             0         15        0         0         49817     |0            
    cmd to tgt             --->tgt exec ok            8         258       0         0         49826     |0            
    tgt exec ok            --->send data-in complete  87        370       0         4         49830     |0            
    send data-in complete  --->send rsp complete      5         233       0         0         49836     |0            
    send rsp complete      --->done to tgt            160       10338     0         7         49844     |0            
      
    number of write command = 49850 
    stages_start           --->stage_end              ave(us) max(us) min(us) total(s)  pass      skip         
    -------------------------------------------------------------------------------------------------------- 
    cmd start              --->cmd to tgt             1         15        0         0         49871     |0            
    cmd to tgt           --->tgt buf rdy            8         279       0         0         49876     |0            
    tgt buf rdy            --->send r2t complete      0         0         0         0         0         |49886        
    send r2t complete      --->data to tgt         0         22        0         0         49890     |0            
    data to tgt            --->tgt exec ok            5         146       0         0         49896     |0            
    tgt exec ok            --->send rsp complete      80        290       0         3         49903     |0            
    send rsp complete      --->done to tgt            151       10335     0         7         49907     |0            
    admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

sess

Connection number.

total io

Total number of executed commands.

number of read command

Number of read commands.

stages_start

Start time in point of statistics.

stage_end

End time in point of statistics.

ave(us)

Average duration (unit: ms).

max(us)

Maximum duration (unit: ms).

min(us)

Minimum duration (unit: ms).

total(s)

Total duration (unit: ms).

pass

Times of successful execution.

skip

Times of skipping the execution.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 641354

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next