No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show nfs server_info

show nfs server_info


The show nfs server_info command is used to check NFS server statistics.


show nfs server_info [ controller=? ]






Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines



Check the current information of NFS servers.

developer:/>show nfs server_info controller=0A 
Thread Number                   : 8 
Max Payload                     : 1048576 
XDR Size                        : 3264 
Server Name                     : nfsd 
Server Freeze                   : False 
Max Connection                  : 26000 
Connection Count                : 1 
Request Max                     : 1024 
Request Total                   : 9 
Request Free                    : 9 
Send Buffer Size                : 8421376 
Receive Buffer Size             : 8421376 
Request Per Connection          : 128 
Age Period(s)                   : 240 
Keepalive Enable                : False 
Keepalive Idle Time(s)          : 0 
Keepalive Interval(s)           : 0 
Keepalive Count                 : 0 
Page Used                       : 2325 
NFS3 Connection Count           : 3 
NFS4 Connection Count           : 2 
NFS4.1 Connection Count         : 4

System Response

The following table describes the parameter meanings.



Max Payload

Maximum protocol payload.

Keepalive Enable

Whether the Keepalive function is enabled.

Keepalive Idle Time

Interval between sending Keepalive packets.

Keepalive Interval

Interval between resending a Keepalive packet.

Keepalive Count

Number of attempts of resending a Keepalive packet.

NFS3 Connection Count

Count of NFSv3 connections.

NFS4 Connection Count

Count of NFSv4 connections.

NFS4.1 Connection Count

Count of NFSv4.1 connections.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634984

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next