No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dha judgeproportion

show dha judgeproportion

Function

The show dha judgeproportion command is used to query evaluation weights for parameters of the disk health analysis (DHA) model.

Format

show dha judgeproportion

Parameters

None

Views

Developer view

Usage Guidelines

OceanStor 5500 V5 Elite/5110 V5/5500 V5/5800 V5/6800 V5/5600 V5/5300 V5 storage systems support this command.

Example

Query evaluation weights for parameters of the DHA model.

developer:/>show dha judgeproportion 
Master Factor1 : 30 
Master Factor2 : 40 
Master Factor3 : 30 
POH(Power-On Hours) : 100 
Duty Cycle : 42 
Response Time of Read/Write IO : 58 
SATA Raw Read Error Rate : 15 
SATA Reallocation Counts : 50 
SATA Current Pending Sector : 10 
SATA Seek Error Rate : 15 
SATA Start Stop Count : 10 
SAS(FC/NLSAS) Grown Defect Entries : 43 
SAS(FC/NLSAS) Informational Exceptions Log Page : 0 
SAS(FC/NLSAS) Read Error Rate : 22 
SAS(FC/NLSAS) Total Uncorrected Errors : 26 
SAS(FC/NLSAS) Non-medium Error Count : 9

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Master Factor1

Master factor 1.

Master Factor2

Master factor 2.

Master Factor3

Master factor 3.

POH(Power-On Hours)

Power On Hour (POH).

Duty Cycle

Usage.

Response Time of Read/Write IO

Response time.

SATA Raw Read Error Rate

SATA raw read error rate.

SATA Reallocation Counts

Count of SATA remapping.

SATA Current Pending Sector

Number of pending bad sectors of SATA disks.

SATA Seek Error Rate

Seek error rate.

SATA Start Stop Count

Count of start and stop operations.

SAS(FC/NLSAS) Grown Defect Entries

Count of SAS remapping.

SAS(FC/NLSAS) Informational Exceptions Log Page

SAS IE log.

SAS(FC/NLSAS) Read Error Rate

SAS read error rate.

SAS(FC/NLSAS) Total Uncorrected Errors

Total number of unrecoverable errors.

SAS(FC/NLSAS) Non-medium Error Count

Number of non-medium errors.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631085

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next