No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain repair_env_status

change disk_domain repair_env_status

Function

The change disk_domain repair_env_status command is used to enter or exit the repair environment of disk domain.

Format

change disk_domain repair_env_status disk_domain_id=? action=?

Parameters

Parameter

Description

Value

disk_domain_id=?

ID of the disk domain whose repair environment you want to enter or exit.

To obtain the value, run the "show disk_domain general" command in the guest view.

action=?

To enter or exit the repair environment of a disk domain.

The value can be "exit" or "enter", where:

  • enter:to enter the environment.
  • exit:to exit the environment.

Views

Developer view

Usage Guidelines

None

Example

To enter the repair environment of disk domain 0, run the following command:

developer:/>change disk_domain repair_env_status disk_domain_id=0 action=enter 
DANGER: You are going to enter or exit a repair environment. Entering the repair environment will make the disk domain and LUNs to go offline and you will not be able to perform system configuration operations. Exiting the repair environment will make the disk domain and LUN go online, and you will be able to perform system configuration operations. 
Suggestion: Before you run this command,  
1. Ensure that host I/Os have been stopped.  
2. Ensure value-added services have been stopped. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 
developer:/>

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 639009

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next