No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete snapsync db

delete snapsync db

Function

The delete snapsync db command is used to forcibly delete database information about snapshot synchronization.

Format

delete snapsync db db_index=? local_fs_id=?

Parameters

Parameter

Description

Value

db_index

Database index of snapshot synchronization.

To obtain the value, run the "show snapsync db" command.

local_fs_id

Local file system ID of snapshot synchronization.

To obtain the value, run the "show snapsync db" command.

Views

Developer view

Usage Guidelines

  • Run this command under the guidance of R&D engineers. This command is only used to delete snapshot synchronization configurations when snapshot synchronization cannot be deleted on the CLI due to snapshot synchronization database errors. Do not use the command in other scenarios.
  • Use this command together with "delete snapsync dcl" and "delete snapsync service_db" commands, and restart the system.
  • OceanStor 5500 V5 Elite/5300F V5/5500F V5/5500 V5/5800F V5/5800 V5/6800F V5/6800 V5/5600F V5/5600 V5/5300 V5 storage systems support this command.

Example

Delete database information about snapshot synchronization "1".

developer:/>delete snapsync db db_index=1 local_fs_id=1 
DANGER: You are about to forcibly delete snapshot synchronization configurations. This operation will cause the corresponding snapshot synchronization to be unavailable. This operation enables you to forcibly delete the configuration information about a single item of snapshot synchronization if snapshot synchronization pairs cannot be deleted properly. 
Suggestion:  Before performing this operation, contact R&D engineers and complete all operations under their guidance. In the meantime, ensure that:  
1. No other users are performing configuration operations.  
2. The entered parameters are correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 586000

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next