No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rm showpairctrlinfo

rm showpairctrlinfo


The rm showpairctrlinfo command is used to view information about remote replication control.


rm showpairctrlinfo pairId






ID of the pair in remote replication.

To obtain the value, run the "show remote_replication general" command.


Diagnostic view

Usage Guidelines

  • This command must be executed on the working controller of a remote replication member LUN.
  • When running this command, add prefix 0x to the hexadecimal pair ID.


View information about remote replication control.

admin:/diagnose>rm showpairctrlinfo 0x22a10bbd6a0000 
localPairId :0xd8490b94c7560000  
validFlag :0x0  
logId :0xffffffffffffffff  
pairStartTime :0xffffffffffffffff  
timerId :4294967295  
timeUp :0  
syncDone :0  
completeTriggered :0  
isMergeShortCycle :1  
pairMngConStatus :1  
cacheDestageStg :1  
rmaSlvLunChildStat :6  
selfHealTime :114  
pairRefresh :0  
lunLockUrgent :0  
serviceFlag :1  
bgrFlag :1  
masterReceoverFlag :0  
taskProcessing :0  
needErrHandle :0  
procBitMap :0  
ret :0  
taskPairTaskCode :4294967295  
localCgId :0xffffffff  
isDelete :0  
deleteForLun :4294967295  
pairSendSn :0  
pairReceiveSn :3  
slvRollBackStarted :2  
Time :1970-01-01 08:00:00

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634171

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next