No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port eth_toe_switch

show port eth_toe_switch


The show port eth_toe_switch command is used to query the switch status of the TOE function of an Ethernet port.


show port eth_toe_switch eth_port_id=?






ID of a port.

To obtain the value, run "show port general".


Developer view

Usage Guidelines

Before performing this operation, ensure that the Ethernet port supports the TOE function.


Query whether the TOE function of Ethernet port "CTE0.A.H0" is enabled. The ID and command output vary depending on products. The ID and output here are just examples.

admin:/>show port eth_toe_switch eth_port_id=CTE0.A.H0 
ETH TCP Offload Engine Enable:Yes 

System Response

The following table describes the parameter meanings.



ETH TCP Offload Engine Enable

Switch status of the TOE function.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 637423

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next