No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showverifylist

mrr showverifylist


The mrr showverifylist command is used to view the list of metadata verification.


mrr showverifylist -t type -p poolId [-o offset -n count]






ID of a metadata verification type.

Possible values are "0", "1", and "2".

  • 0:ckg and chunk.
  • 1:ckg bitmap.
  • 2:invalid extent.


Disk domain ID.

The ID can be obtained by running the "show disk_domain general" command.


Offset of list.

The value ranges from 0 to n minus one. n indicates the length of the list.


Print count of the list.

The value ranges from 0 to 100.


Diagnostic view

Usage Guidelines



View the metadata verification list.

admin:/diagnose>mrr showverifylist -t 0 -p 0 
total num                     : 0 
dup alloc num                 : 0 
smo not set num               : 0 
spare chunk num               : 0 
disk not exist chunk num      : 0 
leak chunk num                : 0 
isolate chunk num             : 0 
error ckg num                 : 0 
associate chunk num           : 0

System Response

The following table describes the parameter meanings.



total num

Indicates the total number.

dup alloc num

Indicates the dup alloc number.

smo not set num

Indicates the smo not set number.

spare chunk num

Indicates the spare chunk number.

disk not exist chunk num

Indicates the disk not exist chunk number.

leak chunk num

Indicates the leak chunk number.

isolate chunk num

Indicates the isolate chunk number.

error ckg num

Indicates the error ckg number.

associate chunk num

Indicates the associate chunk number.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636823

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next