No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
fssnap show deadlist

fssnap show deadlist


The fssnap show deadlist command is used to query the deadlist information about a snapshot.


fssnap show deadlist spaceId deadlistId






File system ID.

To obtain the value, run the "show file_system general" command.


Snapshot deadlist ID.

To obtain the value, run the "fssnap show deadlist_obj" command.


Diagnostic view

Usage Guidelines



Query the information about snapshot deadlist "4007" of file system "1".

admin:/diagnose>fssnap show deadlist 1 4007 
 magic num           : 2713957590 
 kv num              : 3 
 deadlist bytes      : 8192 
 deadlist comp       : 8192 
 deadlist uncomp     : 8192 
 deadlist leaf used  : 4096 
 deadlist indir used : 4096 
 deadlist meta used  : 8192 
 deadlist data used  : 0 
 deadlist include kv (print num (3)): 1:0 8:4008 0:0

System Response

The following table describes the parameter meanings.



magic num

Magic number.

kv num

Number of key-value pairs in the deadlist.

deadlist bytes

Deadlist's used space.

deadlist comp

Deadlist's compressed space.

deadlist uncomp

Deadlist's uncompressed space.

deadlist leaf used

Deadlist's leaf block space.

deadlist indir used

Deadlist's indirect block space.

deadlist meta used

Deadlist's metadata space.

deadlist data used

Deadlist's file data space.

deadlist include kv

Key-value pairs in the deadlist.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 640217

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next