No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain format_parallel

change disk_domain format_parallel


The change disk_domain format_parallel command is used to enable or disable the function of accelerating disk domain background formatting.


change disk_domain format_parallel switch=?






Switch of accelerating background formatting.

The value is "on" or "off", where:

  • "on": to enable the function of accelerating background formatting.
  • "off": to disable the function of accelerating background formatting.


Developer view

Usage Guidelines



Enable the function of accelerating disk domain background formatting.

developer:/>change disk_domain format_parallel switch=on 
DANGER: You are about to enable the formatting acceleration function. This operation affects the service performance. After the formatting is completed, you must disable the formatting acceleration function. 
Suggestion: Before performing this operation, ensure that you need to enable the formatting acceleration function. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638791

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next