No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xnet showrpageinfo

xnet showrpageinfo


The xnet showrpageinfo command is used to show the usage of reserved pages on a specified connection.


xnet showrpageinfo -s seqid






Logical connection ID of the XNET.

The value ranges from 0 to 0xffffffff.


Diagnostic view

Usage Guidelines



Show the usage of reserved pages on connection "16".

admin:/diagnose>xnet showrpageinfo -s 16 
Conn(16) Rpage info: 
Self total num:(256) 
Peer total num:(256) 
Valid total num:(256) 
Allocating num:(0) 
Left num:(164) 
Dst tail:(148) 
Dst head:(56) 
Io max page num:(4)

System Response

The following table describes the parameter meanings.




Connection ID.

Self total num

Size of resources reserved on local pages.

Peer total num

Size of resources reserved on peer pages.

Valid total num

Size of valid resources reserved on pages.

Allocating num

Count of reserved pages that are being applying for.

Left num

Count of remaining reserved pages.

Dst tail

Queue end of resources reserved on peer pages.

Dst head

Queue start of resources reserved on peer pages.

Io max page num

Size of the maximum I/O that may use reserved pages.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631943

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next