No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dedup_lun rescue

show dedup_lun rescue

Function

The show dedup_lun rescue command is used to query LUN rescue repair result.

Format

show dedup_lun rescue controller=? { lun_id=? | start_controller=? }

Parameters

Parameter

Description

Value

controller=?

Indicates the owning controller of the LUN.

The value is in the format of XA or XB or XC or XD.X can be 0 to 3.

lun_id=?

LUN ID.

The value ranges from 0 to 65535.

start_controller=?

Indicates the owning controller of the LUN rescue repaired.

The value is in the format of XA or XB or XC or XD.X can be 0 to 3.

Views

Developer view

Usage Guidelines

None

Example

  • To query LUN rescue repair result, run the following command.
    developer:/>show dedup_lun rescue controller=0A start_controller=0A 
    ID : 0 
    Status : Success
  • To query LUN rescue repair result, run the following command.
    developer:/>show dedup_lun rescue controller=0A lun_id=0 
    ID : 0  
    Start Task Ctrl ID : 0A 
    Status : Success 
    Process(%) : 100  
    Start Time : 2015-09-19 11:11:11 
    End Time : 2015-09-19 12:11:11  
    Current Step Name : Logout rescue online envi 
    Current Step Start Time : 2015-09-19 12:11:11  
    Current Step Process(%) : 100 
    Is Online Stage : Yes 
    Is Cancelling : No 
    Cancel Process(%) : -- 
    Cancel Status : -- 
    Speed : -- 
    Is Data Check : --

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

LUN ID.

Start Task Ctrl ID

Start task ctrl ID.

Status

Total status.

Process(%)

Total process.

Start Time

Rescue task start time.

End Time

Rescue task end time.

Current Step Name

Current step name.

Current Step Start Time

Current step start time.

Current Step Process(%)

Current step process.

Is Online Stage

Is online stage.

Is Cancelling

Is cancelling.

Cancel Process(%)

Cancel process.

Cancel Status

Cancel status.

Speed

Scanning speed.

Is Data Check

Is data check.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 589252

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next