No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dlm mempool

show dlm mempool

Function

The show dlm mempool command is used to view all memory pools of DLM.

Format

show dlm mempool controller=?

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" is an integer ranging from 0 to 3, for example, "0A" or "1C".

Views

Developer view

Usage Guidelines

None

Example

View all memory pools of DLM.

developer:/>show dlm mempool controller=0A 

  Sequence  ID  Size Cmmsize  Number Used  Module ID  Name                               
  --------  --  -----  -------  -------  ----  ---------  -------------------------------- 
  0         1 160 192      2048     0     602        DLM Work Mem Pool                  
  1         2 512 512      2048     3     602        DLM common Pool                    
  2      3 32     32       2048     0     602        DLM Delay Work Mem Pool            
  3         4 48     64       24776 0     602        DLM Inner Timer Pool               
  4         5 40     64       200      2     602        DLM data msg handle Pool           
  5         6 16     16       2048     0     602        DLM alloc data callback Pool       
  6         7 40     64       2048     0     602        DLM data msg response Pool

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Sequence

Sequence number.

ID

Memory pool ID.

Size

Size of used memory.

Cmmsize

Size of CMM memory.

Number

Total.

Used

Number of used memory pools.

Module ID

Module ID.

Name

Memory pool name.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 579492

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next