No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
db showxnetmsginfo

db showxnetmsginfo

Function

The db showxnetmsginfo command is used to query the logs about Xnet messages.

Format

db showxnetmsginfo beginNO endNO

Parameters

Parameter

Description

Value

beginNO

Start number to display logs.

The value is an integer ranging from 0 to 5000.

endNO

End number to display logs.

The value is an integer ranging from 0 to 5000.

Views

Diagnostic view

Usage Guidelines

The value of beginNO must be smaller than or equal to that of endNO.

Example

Query the logs about Xnet messages.

admin:/diagnose>db showxnetmsginfo 0 1 
Print Xnet Msg Info 0 : 
FlowName : Notify db perpare poweron ! 
MsgResult: Xnet message success! 
Msg type is 0 
Msg run time is 2 - 2 ,1 : 50 :17 
Msg src node is 2 
Msg dst node is 3 
Print Xnet Msg Info 1 : 
FlowName : Notify db perpare poweron ! 
MsgResult: Xnet message success! 
Msg type is 0 
Msg run time is 2 - 2 ,1 : 50 :17 
Msg src node is 3 
Msg dst node is 2 
Print Xnet Msg Info end.

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Print Xnet Msg Info

Number of Xnet message logs to be displayed.

FlowName

Process information about displaying Xnet messages.

MsgResult

Details about sending the results after displaying Xnet messages.

Msg type is

Xnet message type.

Msg run time is

Time of sending Xnet messages.

Msg src node is

Source node of sending Xnet messages.

Msg dst node is

Destination node of sending Xnet messages.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632168

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next