No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show scsi timeout_cmd

show scsi timeout_cmd

Function

The show scsi timeout_cmd command is used to query the number of SCSI commands that are not returned by the controller for a long period of time.

Format

show scsi timeout_cmd [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

ID of a controller.

To obtain the value, run the "show controller general" command. In the command output, the value of "Controller" refers to the ID of a controller.

Views

Developer view

Usage Guidelines

Run the "show scsi timeout_cmd" command to check whether all values in the "NotBackNum" column are "0". If any value under the "NotBackNum" column is not "0", some SCSI commands are not returned for a long period of time.The command is directly issued to the current controller by default to query the number of SCSI commands that are not returned. If a specific value is displayed for "Controller", the number of SCSI commands that are not returned by the specified controller is queried and the command output is displayed on the current controller.

Example

  • Query the number of SCSI commands that are not returned by the current controller for a long period of time.
    developer:/>show scsi timeout_cmd 
      
    Name                     Controller ID            Not Back Number 
    ----------------         -------------            --------------- 
    TGT_TIME_OUT_CMD         0A                       16
  • Query the number of SCSI commands that are not returned by the specified controller for a long period of time.
    developer:/>show scsi timeout_cmd controller=0B 
      
    Name                     Controller ID            Not Back Number 
    ----------------         -------------            --------------- 
    TGT_TIME_OUT_CMD         0B                       0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Name

Name of the queried object.

Controller ID

ID of a controller.

Not Back Number

Number of SCSI commands that are not returned for a long period of time.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634439

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next