No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal directory

show pal directory

Function

The show pal directory command is used to query the parent directory information.

Format

show pal directory file_system_id=? directory_id=? [ directory_type=? ] [ position=? ] [ controller=? ]

Parameters

Parameter

Description

Value

file_system_id=?

File system ID.

To obtain the value, run the "show file_system general" command without parameters.

directory_id=?

Directory ID.

To obtain the value, run the "ls -i <file name>" command on the host.

directory_type=?

Directory type.

The value can be "cs" and "ci", where:

  • "cs": case-sensitive.
  • "ci": case-insensitive.

position=?

Directory offset.

To obtain the value, run the "show pal directory" command without parameter "position".

controller=?

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

Query the directory structure information about file "3" in file system "1".

developer:/>show pal directory file_system_id=1 directory_id=3 
File ID  File Name  File Pos          
  -------  ---------  --------------- 
  3        .          10                
  3        ..         11                
  4001     0          281474976710656 
  9        .snapshot  401236004335617 
  0        Next Pos 562949953421311 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

File ID

File ID.

File Name

File name.

File Pos

File Position.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 633853

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next