No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change tgt_switch loss_inq

change tgt_switch loss_inq

Function

The change tgt_switch loss_inq command is used to enable or disable the function of an unmapped LUN to return a specific value when the PERIPHERAL DEVICE TYPE field is delivered.

Format

change tgt_switch loss_inq switch=?

Parameters

Parameter

Description

Value

switch=?

Switch status of the function for an unmapped LUN to return a specific value when the PERIPHERAL DEVICE TYPE field is delivered.

The value is "on" or "off", where:

  • "on": turns on the switch of the function for an unmapped LUN to return a specific value when the PERIPHERAL DEVICE TYPE field is delivered.
  • "off": turns off the switch of the function for an unmapped LUN to return a specific value when the PERIPHERAL DEVICE TYPE field is delivered.

Views

Developer view

Usage Guidelines

  • After this switch is turned on, an unmapped LUN returns a specific value when the PERIPHERAL DEVICE TYPE field is delivered.
  • If this switch is turned on, compatibility problems may occur. Before turning on this switch, contact Huawei technical support engineers.

Example

Enable the function of an unmapped LUN to return a specific value when the PERIPHERAL DEVICE TYPE field is delivered.

developer:/>change tgt_switch loss_inq switch=on 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 641359

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next