No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lm showgdb

lm showgdb

Function

The lm showgdb command is used to check the detail information about a LUN migration in the GDB.

Format

lm showgdb [ 0|1 ] [srcLunId|pairId ]

Parameters

Parameter

Description

Value

[ 0|1 ]

Feature you want to query.

The value can be 0 and 1, where,

  • to check a LUN migration using the source LUN ID.
  • to check a LUN migration using the pair ID.

[ srcLunId|pairId ]

Source LUN ID and pair ID.

To obtain the value of srcLunId, run the show lun_migration general command without operands.

To obtain the value of pairId, run the lm getpairid command on the work controller of the source LUN in diagnose mode.

Views

Diagnostic view

Usage Guidelines

None

Example

To check the detail information about LUN 10 in the GDB, run the following command.

admin:/diagnose>lm showgdb 0 10 
Pairstat : 3 
Speed : 2 
StartTime : 1410336909 
EndTime : 1410337041 
srcId : 10 
dstId : 15 
srcDclId : 2578 
dstDclId : 4294967295 
srciTP : 2 
srcsTP : 2 
pairid : 0 
SplitType : 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Pairstat

Health status of the LUN migration.

Speed

Synchronization speed of the LUN migration.

StartTime

Start time of the LUN migration.

EndTime

End time of the LUN migration.

srcId

Source LUN ID.

dstId

Destination LUN ID.

srcDclId

DCL ID of the source LUN.

dstDclId

DCL ID of the destination LUN.

srciTp

Pair isolation time.

srcsTp

Pair start time.

pairid

LUN migration ID.

SplitType

LUN migration splitting type.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 639750

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next