No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snap showaction

snap showaction

Function

The snap showaction command is used to check the ID of the snapshot on which configuration errors occurred or to check the execution details of a snapshot.

Format

snap showaction { error | snapshotID }

Parameters

Parameter

Description

Value

snapshotID

Snapshot ID.

The value ranges from 0 to n minus one. n indicates the maximum number of LUNs.

error

Error.

The value is an error character string.

Views

Diagnostic view

Usage Guidelines

None

Example

  • To check the ID of the snapshot where configuration errors occurred, run the following command.
    admin:/diagnose>snap showaction error 
    Error Snapshot Ids: 
    1
  • To check the execution details of a snapshot task, run the following command.
    admin:/diagnose>snap showaction 1 
    Snapshot Id:1 
    Time TaskID Action Result 
    Interval 
    ------------------------------------------------------------------------------ 
    -- 
    2014-12-11 17:34:37 3 CREATE TASK OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_LUN_ORIGIN_BIND INIT 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_LUN_ORIGIN_BIND OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_TP_RESTORE_ACTIVE OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_LUN_CACHE_BIND OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_LUN_SET_TP OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_LUN_SET_RW OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_LUN_CHANGE_RW OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_ADD_PERF_OBJ OK 0 
    2014-12-11 17:34:37 3 SNAP_ACTION_TASK_OVER OK 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Time

Time when a step is executed.

TaskID

Task ID.

Action

Step name.

Result

Step result.

Interval

Time taken by a step, expressed in seconds.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632613

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next