No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rm showwaitotherctrltaskinfo

rm showwaitotherctrltaskinfo

Function

The rm showwaitotherctrltaskinfo command is used to query the tasks on the local controller waiting to be returned by the other controllers in the disk array.

Format

rm showwaitotherctrltaskinfo

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

To check the information of the tasks on the local controller waiting to be returned by the other controllers in the disk array, run the following command.

admin:/diagnose>rm showwaitotherctrltaskinfo 
 waitNodeId SerialNo TaskCode CmdCode 
 ---------- -------- -------- ------- 
 pair Id cgid intendNode 
 ---------------- ---------------- ----------

System Response

The following table describes the parameter meanings.

Parameter

Meaning

waitNodeId

Node from which tasks must be returned.

SerialNo

Task serial number.

TaskCode

Task code.

CmdCode

Command code being processed in tasks.

pair Id

Remote replication ID.

cgid

Consistency group ID.

intendNode

WWN of the end that initiated tasks.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 638539

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next