No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_snap_control code

show fs_snap_control code

Function

The show fs_snap_control code command is used to view command execution records of a specific snapshot operation of a specific file system.

Format

show fs_snap_control code file_system_id=? command_type=? controller=?

Parameters

Parameter

Description

Value

file_system_id=?

File system ID.

To obtain the value, run the "show file_system general" command.

command_type=?

Command type.

The value can be "get", "create", "count", "batch", "auto_create", "auto_delete", "modify", "delete", or "roll_back", where:

  • "get": indicates the query command.
  • "create": indicates the creation command.
  • "count": indicates the count command.
  • "batch": indicates the batch query command.
  • "auto_create": indicates the automatic creation command.
  • "auto_delete": indicates the automatic deletion command.
  • "modify": indicates the modification command.
  • "delete": indicates the deletion command.
  • "roll_back": indicates the rollback command.

controller=?

ID of a controller.

To obtain the value, run "show controller general".

Views

Developer view

Usage Guidelines

  • Before performing this operation, check whether the file system ID to be queried is correct.
  • Before performing this operation, check whether the operation type to be queried is correct.

Example

Command execution records of a specific snapshot operation of a specific file system.

developer:/>show fs_snap_control code file_system_id=0 command_type=create controller=0A 
Time Task ID Action Result  
------------------- ------- ------------------------------ ------  
2015-04-30 01:39:59 10 CREATE TASK OK  
2015-04-30 01:39:59 10 SNAP_ACTION_FS_CREATE INIT  
2015-04-30 01:39:59 10 SNAP_ACTION_FS_CREATE OK  
2015-04-30 01:39:59 10 SNAP_ACTION_FS_CREATE_FILL_RET OK  
2015-04-30 01:39:59 10 SNAP_ACTION_FS_TASK_OVER OK  
2015-04-30 01:39:59 10 FINISH OK

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Time

Task end time.

Task ID

Task ID.

Action

Task action.

Result

Result.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 613680

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next