No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change dif_verify_level general

change dif_verify_level general

Function

The change dif_verify_level general command is used to manually set the DIF verification level of a specific module. The configuration is still effective after the system is restarted.

Format

change dif_verify_level general mid=? level=?

Parameters

Parameter

Description

Value

mid=?

Module name.

The value can be "debug", "devlun", "volume", "extent", "cache", "ckg", "bdm", "rss", "logzone", "fc", "smartcache", "sasini", "fs", "deduplun", or "all". If the value is "all", the DIF verification levels of all modules that support DIF verification will be changed.

level=?

DIF verification level.

The value can be "invalid", "critical", "major", "trace" or "debug".

If the value is "invalid", the DIF verification will be disabled.

Views

Developer view

Usage Guidelines

None

Example

  • Disable DIF verification on all modules.
    developer:/>change dif_verify_level general mid=all level=invalid  
    Command executed successfully.
  • Change the DIF verification level of BDM to critical.
    developer:/>change dif_verify_level general mid=bdm level=critical  
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 617744

Downloads: 244

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next