No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
scsi show metacmd

scsi show metacmd

Function

The scsi show metacmd command is used to view the operating status of metadata on a specific LUN.

Format

scsi show metacmd -l lunID

Parameters

Parameter

Description

Value

lunID

LUN ID.

The value ranges from 0 to n minus one. The n indicates the maximum number of LUNs supported by the product.

Views

Diagnostic view

Usage Guidelines

This command must be run on the working controller of the LUN.

Example

View the operating status of metadata on LUN 1.

admin:/diagnose>scsi show metacmd -l 1 
Meta command status[INIT]:0 
Meta command status[EXEC]:0 
Meta command status[DONE]:0 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Meta command status[INIT]

Number of commands in the initialization phase.

Meta command status[EXEC]

Number of commands in the execution phase.

Meta command status[DONE]

Number of commands in the completion phase.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631402

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next