No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_vstore_pair link_status

change hyper_metro_vstore_pair link_status


The change hyper_metro_vstore_pair link_status command is used to forcibly change the management link status of a specific vStore pair.


change hyper_metro_vstore_pair link_status local_pair_id=? link_status=?






Local ID of a vStore pair.

Export the CCDB and check the incorrect local_pair_id.


Status of the vStore pair management link.

The value can be:

  • "Linkup": The link is up.
  • "Linkdown": The link is down.


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can be used to change the management link status of a vStore pair only when the link status of the vStore pair is abnormal and cannot be recovered. Do not use this command in other scenarios.
  • This command must be simultaneously executed at both sides.


Change the management link status of the vStore pair whose local ID is "0" to "Linkdown".

developer:/>change hyper_metro_vstore_pair link_status local_pair_id=0 link_status=Linkdown 
DANGER:You are about to forcibly maintain vStore configurations. This operation changes the link status of the vStore pair.  
When the link status of a vStore pair cannot be recovered normally, you can perform this operation to forcibly change the management link status of the vStore pair to "Linkup" or "Linkdown".  
Suggestion: Before performing this operation, contact R&D engineers and complete all operations under their guidance. In the mean time, ensure that:  
1. No other users are performing configuration operations.  
2. Host I/Os to the member HyperMetro pairs of the vStore pair have been stopped.  
3. The entered parameters are correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636487

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next