No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr rebuildbtreeactioncount

mrr rebuildbtreeactioncount


The mrr rebuildbtreeactioncount command is used to check the statistics of btree rebuild.


mrr rebuildbtreeactioncount




Diagnostic view

Usage Guidelines



To check the statistics of btree rebuild, run the following command.

admin:/diagnose>mrr rebuildbtreeactioncount 

  Counter Type Step Name                         Received      Return Ok     Return Bad Not Return 
  --------------  --------------------------------  ------------  ------------  ------------  ------------ 
  BtreeBuild      sync lock btree                              0             0             0             0 
  BtreeBuild      prepare build                                0             0             0             0 
  BtreeBuild      start pool service                           0             0             0             0 
  BtreeBuild      start build btree                            0             0             0             0 
  BtreeBuild      sync unlock btree                            0             0             0             0

System Response

The following table describes the parameter meanings.



Counter Type

Count type.

Step Name

Operation type.


Counts of received requests.

Return OK

Times of returning OK.

Return Bad

Times of returning Bad.

Not Return

Times of no return.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636145

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next