No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change nas_log function_debug_info

change nas_log function_debug_info

Function

The change nas_log function_debug_info command is used to set the function debugging information.

Format

change nas_log function_debug_info value=? controller=?

Parameters

Parameter

Description

Value

value=?

Debug information. The specification is 50 functions, each function name has less than 50 characters in length, and the number of function lines ranges from 1 to 4294967295.

The value can be "func1:line1,func2:line2..." or "null:null", where:

  • "func1:line1,func2:line2...": set debug information.
  • "null:null": clear debug information.

controller=?

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

Set the function debugging information.

developer:/>change nas_log function_debug_info value=null:null controller=0A 
Command executed successfully. 

developer:/>change nas_log function_debug_info value=value=main:12,test:13 controller=0A 
WARNING: You are about to enable the function debugging of the NAS protocol. This operation may degrade the service performance of the NAS protocol. 
Suggestion: Confirm that you want to perform this operation based on the service type. 
Have you read warning message carefully?(y/n)y  
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632390

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next