No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk factory_reset

change disk factory_reset

Function

The change disk factory_reset command is used to restore factory defaults for a specified disk.

Format

change disk factory_reset disk_id=?

Parameters

Parameter

Description

Value

disk_id=?

Disk ID.

  • The value ranges from DAE000.0 to DAE7FF.99, from CTE0.0 to CTE7.99, or from ENG0.0 to ENG7.99.
  • To obtain the value, run the "show disk general" command.

Views

Developer view

Usage Guidelines

None

Example

Restore factory defaults for disk "DAE000.0". The command output varies with the product.

developer:/>change disk factory_reset disk_id=DAE000.0 
DANGER: You are about to factory reset the specified disk. This operation permanently destroys data on the disk. The data cannot be restored. 
Suggestion: Before performing this operation, ensure that data on the disk can be deleted. 
Have you read danger alert message carefully?(y/n)y 

Enter "I have read and understand the consequences associated with performing this operation." to confirm running this command: 
I have read and understand the consequences associated with performing this operation. 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 583624

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next