No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system configuration_log

show system configuration_log

Function

The show system configuration_log command is used to query configuration logs.

Format

show system configuration_log [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

Controller ID.

To obtain the value, run the "show controller general" command without parameters.

Views

Developer view

Usage Guidelines

  • The "show system configuration_log" command is executed to query all configuration logs in the system.
  • The "show system configuration_log controller=?" command is executed to query configuration logs of a specified controller.

Example

  • Query configuration logs.
    developer:/>show system configuration_log 
     
      Log ID  Index  Total Log Number  Object Type  Object ID Redo Flag  Operational Code 
      --------  --------  -------------------------  ---------------- ------------  -------------- ------------------------ 
      0          0           160                           11                    0               1                    55834599424
  • Query configuration logs by specifying the controller ID.
    developer:/>show system configuration_log controller=0A 
     
      Log ID  Index  Total Log Number  Object Type  Object ID Redo Flag  Operational Code 
      --------  --------  -------------------------  ---------------- ------------  -------------- ------------------------ 
      0          0           160                           11                    0               1                    55834599424

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Log ID

ID of the system control configuration log.

Index

Index of the system control configuration log.

Total Log Number

Total number of system control configuration logs.

Object Type

Object type of the system control configuration log.

Object ID

Object ID of the system control configuration log.

Redo Flag

Redo flag of the system control configuration log.

Operational Code

Operation code of the system control configuration log.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 614176

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next