No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal counter

show pal counter

Function

The show pal counter command is used to query the counts of module interface invoking by the PAL module.

Format

show pal counter [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

Query the counts of module interface invoking by the PAL module.


 developer:/>show pal counter 
Phase                              Start Counter  Back Good Back Bad  Not Back  Latency 
  ---------------------------------  -------------  ----------  --------  --------  ------- 
  STAT_SPC_OBJSET                    0              0           0         0         0         
  HOLD_SPC_OBJSET                    7842           7842        0         0         0         
  RELE_SPC_OBJSET                    7842           7842        0         0         0         
  OWN_SPC_OBJSET                     0              0           0         0         0         
  IS_SPC_OBJSET_MODIFIED          0              0           0         0         0         
  GET_SPC_OBJSET_LBA                 0              0           0         0         0         
  RECOVER_SPC_OBJSET                 0              0           0         0         0         
  COMMIT_SPC_HANDLE                  267897708      267897707 0         1         0         
  COMMIT_SPC_VOL_CTRL_HANDLE         0              0           0         0         0         
  ALLOC_SPC_OBJECT                   0              0           0         0         0         
  CLAIM_SPC_OBJECT                   0              0           0         0         0         
  FREE_SPC_OBJECT                    0              0           0         0         0         
  HOLD_SPC_OBJECT_BONUS              312012064      312012064 0         0         0         
  RELEASE_SPC_OBJECT_BONUS           312012064      312012064 0         0         0         
  DIRTY_SPC_OBJECT_BONUS             267897706      267897706 0         0         0         
  READ_SPC_OBJECT_DATA               0              0           0         0         0         
  READ_SPC_OBJECT_DATA_UIO           0              0           0         0         0         
  WRITE_SPC_OBJECT_DATA              0              0           0         0         0         
  WRITE_SPC_OBJECT_DATA_UIO          267882022      267882022 0         0         0         
  FREE_SPC_OBJECT_DATA               0              0           0         0         0         
  GROW_SPC_OBJECT_SIZE               0              0           0         0         0         
  GET_SPC_OBJECT_DATA_LBA            0              0           0         0         0         
  GET_SPC_OBJECT_META_LBA            0              0           0         0         0         
  GET_SPC_NEXT_OBJECT                0              0           0         0         0         
  HOLD_SPC_DMN                       3237002166     3237002166  0         0         0         
  RELE_SPC_DMN                       3237002165     3237002165  0         0       0         
  LOCK_SPC_DMNFOR_READ               3236054071     3236054071  0         0         0         
  UNLOCK_SPC_DMN_FOR_READ            3236054070     3236054070  0         0         0         
  LOCK_SPC_DMNFOR_WRITE              948062         948062      0         0         0         
  UNLOCK_SPC_DMN_FOR_WRITE           948062         948062      0         0         0         
  VOLS_COUNTER_RESERVE_SPC_OBJECT 0              0           0         0         0         
  VOLS_COUNTER_DERESERVE_SPC_OBJECT  0              0           0         0         0         
  VOLS_COUNTER_WRITE_SPC_CONFIG      0              0           0         0         0         
  VOLS_COUNTER_MSG_POST_ASYNC_MSG 0              0           0         0         0      
  ALLOC_APO                          0              0           0         0         0         
  FREE_APO                           0              0           0         0         0         
  ADD_APO_NAME_VALUE                 0              0        0         0         0         
  REMOVE_APO_NAME_VALUE              0              0           0         0         0         
  LOOKUP_APO_NAME                    107827         107827      0         0         0         
  UPDATE_APO_VALUE                   2              2           0         0         0         
  GET_APO_NAME_COUNT                 24             24          0         0         0         
  GET_APO_NAME_VALUE_AT_CURSOR       932376         932376      0         0         0 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Phase

Specifies the I/O type.

Start Counter

Specifies the I/O start count.

Back Good

Specifies the count of I/Os that are correctly returned.

Back Bad

Specifies the count of I/Os that are incorrectly returned.

Not Back

Specifies the count of I/Os that are not returned.

Latency

Specifies the I/O latency.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 634326

Downloads: 254

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next