No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pair showpairio

pair showpairio

Function

The pair showpairio command is used to query the host I/O list and dual-write I/O list on a specified LUN.

Format

pair showpairio lunid

Parameters

Parameter

Description

Value

lunid

LUN ID.

To obtain the value, run "show lun general" as the administrator.

reqType

I/O type to be displayed.

  • "1": displays a host I/O list.
  • "2": displays a dual-write I/O list.

Views

Diagnostic view

Usage Guidelines

  • This command must be executed on the working controller of a LUN.
  • When "reqType" is set to "1", a host I/O list is displayed. When "reqType" is set to "2", a dual-write I/O list is displayed.

Example

  • Query the host I/O list on a specified LUN.
    ibc_os_hs:/diagnose>pair showpairio 0 1 
     Num objId      objLba     len opCode     result     PreCnt     PostCnt QueueCnt SetDclCnt  SetDclRet  Flag timePoint        logId            reqType 
     ------ ---------- ---------- ------ ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---- ---------------- ---------------- -------
  • Query the dual-write I/O list on a specified LUN.
    ibc_os_hs:/diagnose>pair showpairio 0 2 
     Num objId      objLba     len opCode     result     PairType Flag     PairStatus DclId      WaitingCnt ChunkNum QueueFlag  WaitCkCnt  FlyingCnt  PostCnt PairId     SrcLun     DstLun     Status 
     ------ ---------- ---------- ------ ---------- ---------- -------- -------- ---------- ---------- ---------- ----------  ---------- ---------- ---------- ---------- ---------- ---------- ---------- ------

System Response

The following table describes the parameter meanings.

Parameter

Meaning

num

I/O number.

objId

LUN ID corresponding to an I/O.

PostCnt

Number of REQs that are processing dual-write.

PreCnt

Count of write preprocessing.

result

I/O result.

opCode

Command word corresponding to an I/O.

objLba

LBA offset corresponding to an I/O (unit: sector).

len

I/O length (unit: sector).

QueueCnt

Count of deleting dual-write REQ from a queue.

SetDclCnt

Count of writing DCL in postprocessing.

SetDclRet

Result of writing DCL in postprocessing.

Flag

Status of the source REQ.

timePoint

Point in time of an I/O.

logId

ID of a log in the log zone.

reqType

I/O object type (LUN or file system).

PairType

Pair type.

PairStatus

Pair status when an I/O is delivered.

DclId

DCL ID of a pair.

WaitingCnt

Count of I/Os that have been delivered.

PairId

Pair ID.

SrcLun

Source LUN ID of a pair.

DstLun

Target LUN ID of a pair.

Status

Current status of a pair.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 584768

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next