No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
restore cluster factory_mode

restore cluster factory_mode

Function

The restore cluster factory_mode command is used to clear the cluster configuration data and restore the cluster to the default settings.

Format

restore cluster factory_mode

Parameters

None

Views

Developer view

Usage Guidelines

The cluster restores to the default settings after you run this command.

Example

To restore the cluster to default settings, run the following command.

developer:/>restore cluster factory_mode 
DANGER: You are going to clear the cluster configuration data and restore the cluster to factory settings. This operation interrupts all running services on the storage system. After restart, the original configurations and logs are cleared, and the system is restored to default settings. All data becomes invalid. Read and write operations are unavailable until the system is reconfigured.  
Suggestion: Before performing this operation, implement the following steps: 
1. Determine whether to clear all configurations. 
2. Back up the existing configuration data. 
3. Stop all running services on the storage system. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 586316

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next