No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system_disk upgrade_status

show system_disk upgrade_status

Function

The show system_disk upgrade_status command is used to show the upgrade information of all system disks.

Format

show system_disk upgrade_status [ controller=? ]

Parameters

Parameter

Description

Value

controller

Controller ID.

The value is in the format of "XA", "XB", "XC" or "XD", where the "X" is an integer ranging from 0 to 3.

To obtain the value, run "show controller general".

Views

Developer view

Usage Guidelines

  • To query upgradestatus on all system disks, run "show system_disk upgrade_status".
  • To query upgradestatus on a specific system disk, run "show system_disk upgrade_status controller=?".

Example

Show the upgrade information of all system disks.

developer:/>show system_disk upgrade_status 
Controller  Slot     Upgrade Status 
------------ ------------ ---------------- 
0A      23      Success 
0B      24      Executing

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Controller

Controller ID.

Slot

Slot ID.

Upgrade Status

Upgrade status.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631137

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next