No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rephc showspec

rephc showspec


The rephc showspec command is used to query HyperMetro specifications.


rephc showspec




Diagnostic view

Usage Guidelines



Query HyperMetro specifications.

admin:/diagnose>rephc showspec 
Show rephc mod spec:  
 maxPairNum for SAN         :128  
 maxPairNum for NAS         :64  
 maxDomainNum         :1  
 maxCgNum for SAN            :32  
 maxCgNum for NAS            :0  
 maxPairNumPerDomain  :192  
 maxPairNumPerCg for SAN     :128  
 maxPairNumPerCg for NAS     :32  
 conCurrentTaskNum for SAN :16  
 conCurrentTaskNum for NAS :8  
 maxCopyJobNum for SAN       :8  
 maxCopyJobNum for NAS       :8  
 maxLunNum            :4096 

System Response

The following table describes the parameter meanings.



maxPairNum for SAN

Maximum number of pairs for SAN-based HyperMetro.

maxPairNum for NAS

Maximum number of pairs for NAS-based HyperMetro.


Maximum number of domains.

maxCgNum for SAN

Maximum number of consistency groups for SAN-based HyperMetro.

maxCgNum for NAS

Maximum number of consistency groups for NAS-based HyperMetro.


Maximum number of pairs in each domain.

maxPairNumPerCg for SAN

Maximum number of pairs in each consistency group of SAN-based HyperMetro.

maxPairNumPerCg for NAS

Maximum number of pairs in each consistency group of NAS-based HyperMetro.

conCurrentTaskNum for SAN

Number of concurrent tasks of SAN-based HyperMetro.

conCurrentTaskNum for NAS

Number of concurrent tasks of NAS-based HyperMetro.

maxCopyJobNum for SAN

Maximum number of copy jobs of SAN-based HyperMetro.

maxCopyJobNum for NAS

Maximum number of copy jobs of NAS-based HyperMetro.


Maximum number of LUNs.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 639621

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next