No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d powerevent -v

cliget -d powerevent -v


The cliget -d powerevent -v command is used to view power module alarms.


cliget -d powerevent -v <powername>






Power module to be queried.

  • The value of 2U controller can be "onepower_0" or "onepower_1", where:
    • "onepower_0": power supply 0;
    • "onepower_1": power supply 1.
  • The value of 3U/6U controller can be "onepower_0","onepower_1","onepower_2" or "onepower_3",where:
    • "onepower_0": power supply 0;
    • "onepower_1": power supply 1;
    • "onepower_2": power supply 2;
    • "onepower_3": power supply 3.


serial port mode

Usage Guidelines



View power module alarms.

administrator@SMM_6U / $ cliget -d powerevent -v onepower_0 
Power0's Failure : 1 
Power0's Over_Temperature : 0 
Power0's STB12V_Over_Voltage : 0 
Power0's STB12V_Over_Current : 0 
Power0's 12V_Over_Voltage : 0 
Power0's 12V_Over_Current : 0 
Power0's Input_Loss : 1 
Power0's Input_Under_Voltage : 1 
Power0's Fan_alarm : 0 
Power0's Set_PSalert : 0 
Power0's OPERATION_OFF : 0 
Power0's PSON : 0 
Power0's Input_Over_Voltage : 0 
Power0's i2c state : 0 

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 632389

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next