No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ld show allstat

ld show allstat

Function

The ld show allstat command is used to query all status information about a disk in specified cycles.

Format

ld show allstat l=? c=?

Parameters

Parameter

Description

Value

l=?

ID of a logical disk.

The value ranges from 0 to 65,535.

To obtain the value, run ld show disk.

c=?

Number of cycles.

The value ranges from 1 to 60.

Views

Diagnostic view

Usage Guidelines

None

Example

Query all status information about logical disk 525 in five cycles.

admin:/diagnose>ld show allstat l=525 c=5 
The result is 0. 
 Logicdisk(525)'s stat info  : ioCurrent(17), svctm(1924), dskUseRate(99) when cycle is 5. 
 Logicdisk(525)'s iops info  : read(256), write(259). 
 Logicdisk(525)'s ioBand info  : read(67317), write(71610). 
 Logicdisk(525)'s ioDelay info : read(20782), write(42734), total(31826).

System Response

The following table describes the parameter meanings.

Parameter

Meaning

stat info

Status of the logical disk.

ioCurrent

Number of concurrent I/Os.

svctm

Average service time of I/Os.

dskUseRate

Disk utilization (%).

iops info

IOPS.

read

Read I/O.

write

Write I/O.

ioBand info

Bandwidth of read and write I/Os (KB/s).

ioDelay info

Latency of read/write I/Os.

total

Total average latency.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 591477

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next