No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete lun_migration_rsstype

delete lun_migration_rsstype


The delete lun_migration_rsstype command is used to forcibly delete the LUN migration property of a specified LUN.


delete lun_migration_rsstype type=? lun_id=?






Indicates the ID of a LUN.

To obtain the value, run "show lun general".


Indicates a LUN type.

The value can be "source" or "target", where

  • source: the LUN is the source LUN of the LUN migration.
  • target: the LUN is the target LUN of the LUN migration.


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance.
  • This command can only be used when a LUN migration with incorrect DB information cannot be deleted on the CLI. Do not use this command in other scenarios.
  • This command must be used with the "delete lun_migration_db" command. Restart the system after running the commands.


To delete the LUN migration property of the source LUN of LUN 0, run the following command:

developer:/>delete lun_migration_rsstype type=source lun_id=0 
DANGER:You are clearing the LUN migration properties of a specified LUN, this operation will forcibly delete the LUN properties of LUN migration. 
Suggestion:Before you perform this operation, please contact technical support engineers. 
Have you read danger alert message carefully?(y/n)y 

Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 639340

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next