No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show domain controller

show domain controller

Function

The show domain controller command is used to query the domain controller list.

Format

show domain controller [ type=? ] [ domain_controller_ip_address=? ] [ controller=? ]

Parameters

Parameter

Description

Value

controller=?

Controller ID.

The value format can be "XA", "XB", "XC" and "XD", where the value of X can be an integer ranging from 0 to 3. To obtain the value, run the "show controller general" command.

type=?

Information type of domain controllers.

The value can be "cache" (default), "one_domain_controller", or "all_domain_controller", where:

  • "cache": queries the domain controller information from the domain controller list of cache.
  • "one_domain_controller": queries information about a domain controller using its IP address.
  • "all_domain_controller": queries information about all domain controllers using DNS.

domain_controller_ip_address=?

Domain controller IP address.

IPv4 or IPv6 address.

Views

Developer view, vstore developer view

Usage Guidelines

None

Example

None

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Domain Controller Name

Name of the domain controller.

FQDN Name

FQDN of the domain controller.

Priority

Priority of the domain controller.

Weight

Domain controller weight.

Write Enabled

Whether the domain controller allows writes.

Prime Domain Controller Enabled

Whether the domain controller is the primary controller.

Is Available Controller

Whether the domain controller is available.

IP Address

Domain controller IP address.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 637497

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next