No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showconflictextent

mrr showconflictextent

Function

The mrr showconflictextent command is used to view the list of extent verification.

Format

mrr showconflictextent -i index

Parameters

Parameter

Description

Value

index

Print index of list.

The value ranges from 0 to n minus one. n indicates the length of the list.

Views

Diagnostic view

Usage Guidelines

None

Example

View the extent verification list.

admin:/diagnose>mrr showconflictextent -i 0 
Start index : 0 
Total number: 2 
Index Extent Type Error Type Vol Index Vol Type Extent Id Ckg Id Ckg Offset Init Migrate Zone Queue Id Queue Type  
----- ----------- ---------- --------- -------- ----------------- ---------- ---------- ---- ------- ---- -------- ----------  
0 Root ext Dup alloc 3 Meta 0x40004000000d 0x40004000 0xd 1 0 1 --- ---  
1 Queue ext Dup alloc 4 Data 0x400040011006 0x40004001 0x6 1 0 1 3 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Start index

Indicates the start index.

Total number

Indicates the total number.

Index

Indicates the index of output results.

Extent Type

Indicates the type of conflicting extent.

Error Type

Indicates the error type.

Vol Index

Index of the volume where the conflicting extent is located.

Vol Type

Type of the volume where the conflicting extent is located.

Extent Id

Indicates the ID of conflicting extent.

Ckg Id

ID of the CKG where the conflicting extent resides.

Ckg Offset

Offset of the conflicting extent on the CKG.

Init

Indicates the initialization state of the conflicting extent.

Migrate

Whether it is a migrated extent.

Zone

Zone to which the conflicting extent belongs.

Queue Id

ID of the queue to which the conflicting extent belongs, if the value of extent type is queue extent. Otherwise, this parameter is invalid.

Queue Type

Type of the queue to which the conflicting extent belongs, if the value of extent type is queue extent. Otherwise, this parameter is invalid.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636513

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next