No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pair showloglist

pair showloglist

Function

The pair showloglist command is used to query log information about a specified dataset.

Format

pair showloglist dsid

Parameters

Parameter

Description

Value

DS ID

LUN ID or file system ID.

To obtain the value, run "show lun general" or "show filesystem general" as the administrator.

Views

Diagnostic view

Usage Guidelines

This command must be executed on the working controller of dataset.

Example

Query log information about a specified dataset.

ibc_os_hs:/diagnose>pair showloglist 0 
---------------- 
DS id                   :0 
ref cnt                 :1 
left log              :FALSE 
isBgrOpen               :1 
pairId                  :4294967295 
catchupDCL              :-1 
nextlogid               :0 
log in the list:

System Response

The following table describes the parameter meanings.

Parameter

Meaning

DS id

Object ID.

ref cnt

Number of pairs on the object.

left log

Whether logs are left in the log zone and not recovered to the list in memory.

isBgrOpen

Whether a background task is started.

pairId

ID of the pair on which a catchup task will be performed for a LUN or an atomic copy task will be performed for a file system.

catchupDCL

DCL ID for the LUN on which a catchup will be performed.

nextlogid

ID of the next log to be processed when a catchup task is performed for a LUN.

curIndexKey

ID of the I/O being processed when an atomic copy task is performed for a file system.

log in the list

Remaining log ID list.

isAtomic

Whether an atomic copy task is running on a file system.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 631555

Downloads: 252

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next