No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showfailedflowtrace

sys showfailedflowtrace

Function

The sys showfailedflowtrace command is used to query the information about a failed object flow.

Format

sys showfailedflowtrace

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Query the information about a failed object flow.

ibc_os_hs:/diagnose>sys showfailedflowtrace 
 ID          Date Time             Flowid: Failed Flow Name             Phaseid: Failed Phase Name            Stepid: Failed Step Name            Failed Action Name       
 ------  ---------------------  -----------------------------------  -----------------------------------  -----------------------------------  ----------------------------------- 
 [0000]  [2017-07-12 16:07:45]  3  : FLOW_OBJ_NODE_FAULT_BEFORE      0  : switch_L2Cache_service_phase 0  : SYS     reclaim resource        NodeFault: GetVnodeLock                  
 [0001]  [2017-07-12 16:07:45]  3  : FLOW_OBJ_NODE_FAULT_BEFORE      0  : switch_L2Cache_service_phase 0  : SYS     reclaim resource        NodeFault: FreeVnodeLock                 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Failed object flow ID.

Date Time

Time when a flow fails.

Flowid: Failed Flow Name

ID and name of a failed flow.

Phaseid: Failed Phase Name

ID and name of a failed flow execution phase.

Stepid: Failed Step Name

ID and name of a failed flow execution step.

Failed Action Name

Name of a failed flow action.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 614313

Downloads: 242

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next